Oztag match day

About 10 minutes. Do it before game day.

1. Create your team

   Open Kickd and sign in. Tap Create Team, then enter the team name, the sport (Oztag) and the age group off your rego. The age group sets your side size and half length for you, so there's nothing to work out.

2. Add your players

   Go to the TEAM tab at the bottom of the screen. Tap + Add Player and enter a name and shirt number. That's your whole roster, and you can add or edit players any week.

   From U10, tick where each player can play under Plays: Wing, Link or Middle. Auto-fill and rotations use it to put players where they fit. Leave it blank for anywhere.

3. Check the format

   On the same TEAM tab, check the AGE GROUP: it locks after your first match, so fix it now if it's wrong. Tap a HALF TIME chip to match your comp clock (12 to 20 minutes, 17½ included), or type any length from 10 to 20 into the custom box. If your comp plays a smaller side, set it under TEAM SIZE. From U10, if your comp calls the outside middles rovers, pick ROVER L/R under MID NAMES.

   

4. Invite parents and helpers

   On the TEAM tab, tap Share Join Link under INVITE PARENTS/GUARDIANS (INVITE SUPPORTERS on an Opens team) and send it to your team chat. Parents follow the score live on their own phones. The link is for adults only.

   Want a helper to run the clock and log the game? Tap Share PA Link under PERFORMANCE ANALYSTS. They join as your Performance Analyst and run the live screen while you coach.

   Borrowing a player for the day? Tap + Add Guest Player. Guests play and get minutes but stay out of your season stats.

Comps set their own clocks, anywhere from 10 to 20-minute halves.

Until your first match, HOME shows a BEFORE YOUR FIRST GAME checklist. Tap any line to go straight there. Your three free matches include every stat, so you can see what Team Stats adds before you choose a pass.

About 60 seconds on the sideline.

1. Mark who's here

   On the home screen, tap any player who didn't turn up to grey them out. Everyone else is in.

   Type the other team's name under OPPONENT if you like. It shows on the live screen.

2. Set your team

   U10 and up: tap Set Lineup and fill wings, links and middles, or tap Auto-fill to build a fair-share starting side from who turned up.

   U6 to U9: there are no positions. You can pick who starts on Set Lineup (or tap Auto-fill), or skip it, and Kickd rotates to share game time.

   

3. Tap Start Game

   The clock runs in halves, at the length you set on the TEAM tab.

   From U10, if your starting side isn't set, Start Game opens the lineup first. It only asks for as many players as turned up.

   

The live screen.

1. Log the tries

   Tap your score cell, then tap the try-scorer. Each try is one point on the running score.

   On a tablet, tap Try in the stats column beside the field, then the scorer.

   

2. Log theirs

   An opposition try is a single tap on their score cell.

3. Fix a mistake

   On a phone, long-press your score cell to take back the last thing you logged. Long-press theirs to take back their last try. On a tablet, tap Undo in the match log. Or say "undo".

4. Roll the subs

   Two taps: the player coming off, then the player going on. Interchange is unlimited and there's no paperwork. Every swap updates everyone's minutes.

   

5. Keep it fair

   Every player shows their minutes, on the field and on the bench. Anyone getting too much game time turns amber.

6. If a player can't go on

   Long-press them and choose Mark Unavailable. Kickd takes them off, and from U10 you tap a bench player to fill the spot.

   For a no-show, choose Not Here - Mark Absent. It clears their minutes.

Match stats, U13 and up

Match stats come with Team Stats: try assists, line breaks, kicks, tags made, errors and penalties.

On Team Stats, U10 to U12 teams can switch them on with EXTENDED STATS on the TEAM tab. Voice calls for them start at U13.

On a phone, tap the round stats button at the bottom left, pick a stat, then tap the player. On a tablet, pick the stat in the column beside the field.

On at every age.

Rotation times are up to you: any interval from 2 to 15 minutes, to suit your comp and your bench.

Kickd runs the alarm and lines up each swap: the player with the most minutes comes off, and the player who has waited longest on the bench goes on.

• Set how often under ROTATION on the TEAM tab. When it's time, Kickd buzzes and ROTATION TIME! shows who's coming off and going on.
• Rotate Now makes every swap in one tap, or tap Dismiss and play on.
• Big bench? Set SUBS PER ROTATION on the TEAM tab to swap a few players at a time instead of a full line change.
• From U10, Kickd prefers a bench player ticked for that spot (Wing, Link or Middle).
• If nobody on the bench fits, the next player waiting goes on anyway, with an amber warning mark.
• You're in charge. Drag the GOING ON list to change who's next, or tap a name under COMING OFF and pick someone else on the field. Or ignore the card and sub whenever you like.
• Junior matches (U6 to U12) get a Fairness % plus a season chart on the stats screen.

Stoppages, early whistles, late arrivals.

• Tap Pause for a long stoppage and Resume to go again. On a phone it sits under the field. On a tablet it's the pause button in the top bar.
• The clock stops itself at each break. To end a period early, tap Finish Half (or Finish Q1 and so on for quarters) and confirm.
• At the break, make any changes, then tap Start 2nd Half (Start Q2 and so on for quarters).
• Clock beat the whistle? On the break screen, tap Half not finished, keep playing (Quarter for quarters). Keep logging as normal, nothing spills into the next period, then tap End 1st Half when play stops. Full time has the same button.
• You can lock your phone. The clock keeps running and alerts still come through. If play was stopped while you were away, tap Rewind, play was stopped when you come back.
• Someone turns up late? Tap + Add to Game next to their name under Absent on the live screen.
• The clock counts down each period. Prefer it counting up? Change MATCH CLOCK on the TEAM tab.

No rush at the huddle.

End the game and pick your player

1. At full time, tap End Game at the top of the screen. The match ends straight away.

2. Pick your Player of the Match on the results screen when you've got a moment. You've got an hour after the whistle, and Kickd sends a reminder if you haven't picked.

Who votes, and when

• Juniors (U6 to U12): parents vote Players' Player on their child's behalf, for an hour after full time. It's on by default, under PLAYERS' PLAYER on the TEAM tab.
• Every vote builds the season Players' Player leaderboard. Parents never see the tally.
• Seniors (U13 to Opens): turn on PLAYER VOTING on the TEAM tab and players vote after each match.
• Opens players join with your Player Code (TEAM tab). U13 to U18 players need a parent to switch on their login under PLAYER LOGINS on the parent's TEAM tab.

After the game

• Tap Share result to the team on the results screen to send the score to your group chat.
• Every match is saved on the STATS tab under HISTORY. Tap one for the full match.
• On Team Stats, tap Share PDF there to send the match report to your club or parents.
• Ran a test game by mistake? The head coach can remove it with Delete Match.

Dead spots, country grounds, carnival days.

• The whole match runs on your device. The clock, the lineup, scores, stats and subs don't need the internet.
• Finished games wait on the device and save to your season as soon as reception returns.
• Parents' live view needs signal. Their screens catch up once they're connected again.
• Voice works with no signal too, once the voice pack is on your phone. Download it at home on Wi-Fi: on the TEAM tab, tap Download in the KICKD CALLOUT row (about 68 MB).

Kickd Callout comes with every pass, at every age.

1. Pick your mic

   On HOME, tap Bluetooth headset or Phone mic (Tablet mic on a tablet). A headset with a boom mic holds up in crowd noise. The phone or tablet mic suits training or a quiet ground, and you tap the mic button each time you want it to listen.

   

2. Arm the mic

   If you picked a mic on HOME, it arms itself at the start of play. Otherwise tap the mic button in the top bar. Red means it's logging what it hears, and the bar shows what it heard and what it logged.

3. Mute when you step away

   Tap the mic again to mute for sideline chats or stoppages. On the phone or tablet mic, press and hold to mute. Nothing logs while it's muted. The mic stays armed through the break and switches off at full time.

Which headset

A Bluetooth headset keeps you hands-free, with your eyes on the game, so one person can log the whole match by voice. Most Bluetooth headsets work, and coaches have even used smart glasses, but results vary with noise cancelling. The Shokz OpenComm 2 boom mic is the best tested on a noisy sideline.

Mix taps and voice freely. Undo fixes either.

Speech recognition runs on your device. Your audio is never recorded, stored or sent anywhere.